Product No.: 81709
Digital Decoder für Glockenanker Motore. Der Decoder hat eine Taktung von 32 kHz und 128 Fahrstufen. Grösse: 23,5x15,5x6,5mm
mfx Decoder mit 128 Fahrstufen;
1,1A Dauerbelastbarkeit. / Stand Juni 2014
The LokPilot V3.0 M4 was developed from scratch especially for Märklin® systems. It reflects years of experience, gathered by ESU during the engineering of digital decoders.
The LokPilot V3.0 M4 is a genuine multi-protocol decoder: Besides its main field of application in combination with mfx® stations, it handles Motorola® command stations (e.g. Märklin® 6021) as well as conventional AC driven layouts. The LokPilot V3.0 M4 recognizes the operational mode fully automatically and converts on the fly.
The LokPilot V3.0 M4 runs DC – and coreless motors directly, while all-current motors need a Hamo-magnet retrofit. The motor is driven by 40 kHz Pulse width frequency (PWM) for a super silent, safe run. Together with the 128 mfx® speed steps and fourth generation back EMF, unprecedented performance is realized.
The LokPilot V3.0 M4 also operates on analog AC layouts, on which even starter – and top speed can be limited individually. At last you can slow down your old high-speed runners.
The LokPilot V3.0 M4 sports four function outputs, which can be dimmed, and allocated individually to a function. Besides beacon, strobe and alternate flashing, there is a Mars light as well as a Gyra light.
The LokPilot V3.0 M4 can be adapted to any loco or operational mode. For this, you can comfortably change parameters with the systems-stations – during operation and without having to open the loco or put it on a programming track. That’s made possible through the built-in, genuine Duplex communication between systems-center station and decoder. For owners of 6020®, 6021® – or delta® stations the LokPilot V3.0 M4 decoder utilises the time-proven, simple programming procedure.
All function outputs and the motor connection are overload – and short circuit protected.
The intern decoder software can be replaced by a new firmware update, if desired.
Märklin Nr.: 3464, 34641,3664, 37650,37652, 37653, 37654, 37655, 37615, 37616, 37617, 37649, Trix 22133
Neuheit Juni 2016
Märklin Nr.: 3357, 3358, 3558, 3658 / Trix 22772 / für Anker D= 17 / 18 mm
Neuheit Juli 2015 (sehr gute Fahreigenschaften)